Hyundai H-CDM8047 - Manual (Page 13)

13
Press and hold the Tuning up/ down button to seek the band in up or down direction and stop when a station is received.
- SEEK2: Press the Tuning up/ down button briefly to increase or decrease the frequency by 1 step size.
Press and hold the Tuning up/ down button increase or decrease the frequency rapidly until the button is released, the
different between the same operation at Seek 1 mode is that this time the radio will not stop at any station.
h. Stereo mode
Use this mode to select stereo or monaural reception for FM radio stations. You can sometimes improve reception of distant
stations by selecting mono mode.
i. DX mode
Use this mode to change between Local and Distant (-DX) tuning mode. Local mode improves reception in some areas where the
signal is too strong.
DSP button (preset equalizer) [2]
POP > ROCK > CLASSIC > FLAT > DSP OFF
At DSP off mode preset equalizer will be controlled by Bass/ Treble setting.
Display button (DISP) [8]
At Radio mode press this button to view frequency of the station in listening, clock time and program type (PTY).
Scan button (SCAN) [7]
Press this button, the radio will tune up to search stations, the available stations will blinking and stay on the display for a few
seconds.