Hyundai H-CDM8047 - Manual (Page 15)

15
Station preset buttons (1-6) [20]
You can store and recall six preset radio stations by pressing 1-6 buttons.
To store a station:
- Select a band (if needed)
- Select a station by Tuning up/ down button
- Hold a Preset button which you want store the station for at least 2 seconds. The preset number will appear on the display
accompanied by a beeps sound.
To recall a station:
- Select a band (if needed)
- Press a Preset button briefly to recall the stored station.
Band button [23]
Press this button to change between band FM, MW(AM) and OIRT.
AF button (Alternative Frequencies) [9]
When pressed short, AF switching mode is selected.
When AF switching mode is selected, the radio check the signal strength of the AF all the time.
When pressed long, it is activated as regional mode ON/ OFF.
Regional mode ON:
AF Switching or PI SEEK is implemented to the station which have all PI codes are same as current station. REG segment is
turned on, in LCD display.
Regional mode OFF:
The Regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented.
Some broadcasting stations may change their program from normal broadcasting to regional broadcasting for a certain period.
When regional mode is off, the region identification in the PI code is ignored; the radio may switch to a local variant of the