Transom angle adjustment, Operation – HONDA BF20D User Manual
Page 45
43
TRANSOM ANGLE
ADJUSTMENT
OPERATION
ADJUSTING ROD
LOCKED POSITION
PUSH
ADJUSTING ROD
TO LOCK
UNLOCKED
POSITION
TURN UP
TO CHANGE
ADJUSTING ROD
T
T
U
U
R
R
N
N
U
U
P
P
P
P
U
U
S
S
H
H
ADJUSTING ROD
LOCKED POSITION
PINCH
(manual tilt SH type/LH type)
(manual tilt XH type/R type)
(manual tilt SH type/LH type)
(T type)
(XH type/R type/T type)
(XH type/R type/T type)
The transom angle adjusting rod
limits the tilt angle of the outboard
motor when fully lowered.
To adjust, first tilt the outboard
motor so it is not resting on the rod.
Pinch the end of the rod.
Remove the rod and reinsert it in the
desired position.
Proper adjustment prevents the
outboard motor from being tilted too
low (p.
Push the rod in and turn the end of
the rod up, so the latch will fall into
line with the rod.
Push the rod in and turn the end of
the rod down, so the latch will fall to
the locked position. Then release the
rod.
Push the rod in and hook the end of
the rod. Then release the rod.
07/09/19 18:23:23 31ZY0600_044