Controls, H type (tiller handle), Engine stop switch and switch clip – HONDA BF20D User Manual
Page 21: Choke knob (manual choke type), Controls and features
19
CONTROLS
H Type (tiller handle)
CONTROLS AND FEATURES
ENGINE STOP
SWITCH
LANYARD
SWITCH CLIP
CHOKE KNOB
LANYARD
O
O
F
F
F
F
O
O
N
N
Engine Stop Switch and Switch
Clip
Choke Knob
(manual choke type)
The engine stop switch has controls
for normal engine stopping and
emergency engine stopping.
The switch clip must be inserted in
the engine stop switch in order for
the engine to start and run. The
lanyard should be attached to the
operator’s PFD (Personal Flotation
Device) or worn around the wrist as
shown.
When used as described, the engine
stop switch and lanyard system stops
the engine if the operator falls away
from the controls.
The choke knob opens and closes the
choke valve in the carburetor.
The ON position enriches the fuel
mixture for starting a cold engine.
The OFF position provides the
correct fuel mixture for operation
after starting, and for restarting a
warm engine.
A spare switch clip is supplied in the
tool bag with the motor.
07/09/19 18:19:49 31ZY0600_020