Transporting, With outboard motor installed on boat, With outboard motor removed from boat – HONDA BF20D User Manual
Page 95
93
WITH OUTBOARD MOTOR
INSTALLED ON BOAT
WITH OUTBOARD MOTOR
REMOVED FROM BOAT
TRANSPORTING
CARRYING HANDLE
LUG
MOTOR SUPPORT BAR
(commercially available)
Lif ting the outboard motor by the
engine cover, or using the
installed outboard motor as a
handle or lever to move the boat,
can damage the outboard motor.
When trailering a boat with the
outboard motor attached, leave the
engine in the normal running position,
if possible, and tighten the steering
friction lever securely (p.
If there is insufficient road clearance
in the normal running position, then
tilt the outboard motor and use a
motor support bar, or remove the
outboard motor from the boat. Refer
to the manufacturer’s instructions for
using a motor support bar.
Secure the outboard motor in either
the vertical or horizontal position
shown on p.
To carry, hold the outboard motor by
the carrying handle, or hold by the
carrying handle and the lug beneath
the engine cover lock latch, as shown.
07/09/19 18:30:49 31ZY0600_094