Video operation – haier IPDS-10 User Manual
Page 12
Pr
Y
Pb
COMPONENT
VIDEO OUT
11
VIDEO OPERATION
AUX IN
DC IN 8.5V
Pr
Y
Pb
COMPONENT
VIDEO OUT
To Component input of TV
TV
Cable (not supplied)
Connecting the Video Cord to View a Video/Picture from iPod/iPhone
The below diagram show the connection options available.
NOTE:
When viewing a video/picture from iPod/iPhone on your TV, use a component video cord
(not supplied) to connect the COMPONENT VIDEO OUT jack on the unit and the component
video input on your TV.
•
After you have connected the unit, change the video input mode on your TV. For details,
also refer to the insrtuction manual for your TV.
Consult your iPod documentation for details on how to enable video output on you
model of iPod / iPhone.
Remarks:
•
When you have your iPod outputting video and the unit connected to your TV, you may
need to change the output setting to TV output.
•
Press the
button on the remote control to escape the current video playback
select the Video by using + / - button, then press
button to resume on TV screen.
•
Due to the software used in iPod Nano 3G & iPod Classic, to change the video the
video output mode you will need to press the
button to escape the current video
playback, then press
to resume.
•
Component video output to television is supported by iPod nano (3rd, 4th and 5th
generation), iPod touch (2nd generation), and iPod classic at 480p or 576p resolution;
and by iPod touch (1st generation), iPhone, iPhone 3G, iPhone 3GS, iPhone 4.
VIDEO OUT
ENTER
NOTES:
MENU
ENTER
Video play on iPod / iPhone
TV out with Component out