HPP Enterprises 2740P - Manual (Page 68)

Speaker assembly
Description Spare part number
Speaker assembly 597836-001
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 39 ).
5. Remove the following components:
a. Hard drive cover (see Hard drive on page 41 )
b. Keyboard (see Keyboard on page 48 )
c. Top cover (see Top cover on page 51 )
NOTE: Removal of the speakers involves loosening the front latch mechanism. This mechanism
includes a small spring. Please note the installed location of this spring in the following illustration
prior to disassembling the latch mechanism to allow for correct reassembly.
Remove the speaker assembly:
1. Position the computer right-side up, with the front toward you.
60 Chapter 4 Removal and replacement procedures ENWW