HotBrick VPN Client - Manual (Page 15)

HotBrick VPN Client User Manual Property of HotBrick — 2005 15
4.4.3 Settings description
Aggressive Mode If checked, the VPN client will used aggressive mode as negotiation mode with
the remote gateway
Nat port Negotiation port for IKE. Default value is 500.
Local ID Local ID is the identity the VPN client is sending during Phase 1 to VPN gate-
way.
This identity can be:
•1 an IP address (type = IP address), for example: 195.100.205.101
•2 an domain name (type = DNS), e.g. mydomain.com
•3 an email address (type = Email), e.g.
[email protected]
•4 a string (type = KEY ID), e.g. 123456
•5 a certificate issuer (type=DER ASN1 DN) (see Certificates configura-
tion)
If this identity is not set, VPN client's IP address is used.
Remote ID Remote ID is the identity the VPN client is expecting to receive during Phase 1
from the VPN gateway. This identity can be:
•6 an IP address (type = IP address), for example: 80.2.3.4
•7 an domain name (type = DNS), e.g. gateway.mydomain.com
•8 an email address (type = Email), e.g. [email protected]
•9 a string (type = KEY ID), e.g. 123456
•10 a certificate issuer (type=DER ASN1 DN) (see Certificates configura-
tion)
If this identity is not set, VPN gateway's IP address is used.
X-AUTH Here are specified the login and password of an X-AUTH IPSec negotiation.