HotBrick VPN Client - Manual (Page 8)

HotBrick VPN Client User Manual Property of HotBrick — 2005 8
4.1.1 How to set “USB mode" on?
• Select menu File > Configuration Mode
• Select USB Stick
• Optional: indicates the drive of the USB stick if you’ve plugged it in
Note: At this stage, if an USB stick containing a VPN configuration with tunnel security elements is already
plugged in, the associated drive will be automatically recognized. Please note also that this is not necessary to
insert a USB Stick during this step. In case no USB Stick is plugged in, the following pop window will inform the
user:
Once USB mode is set on, the “USB token box” (status bar) shows “USB”. The text is gray (i.e. see below) if no
USB stick is plugged in. The text is plain when a USB Stick is plugged in.
4.1.2 How to enable the USB Stick?
When you insert a new USB stick, the IPSec VPN Client automatically propose to enable the USB stick through
the following options: