Hornet Car Security 851T - Manual (Page 22)

19 © 2 0 0 2 d i r e c t e d e l e c t r o n i c s , i n c .
step 5
Parking light flash
There are several different types of parking light circuits. The
following description is for a standard negative-triggered parking
light circuit, usually located at the light switch. If the web vehicle
information suggests a different type of parking light circuit,
please contact Hornet Technical Support.
Using the web information on the vehicle, locate the suspected
wire and place the red lead of the meter to a constant (+)12 volt
source and secure it. Place the multi-meter in the DC position.
Using the black lead of the meter, probe the wire. With the
switch in the off position the meter will read 0.00 volts. While
watching the meter, turn the switch to the parking light posi-
tion. The meter will read between 10.00 volts and 13.00 volts.
Once you have identified the correct wire, solder the WHITE
wire on the main connector to it and cover the connection with
electrical tape.
➜