Hornet Car Security 851T User Manual

Page 23

Advertising
background image

20

© 2 0 0 2 d i r e c t e d e l e c t r o n i c s , i n c .

step 6

Door locks

Although there are numerous types of door lock circuits, the

most common is the negative triggered door lock system. Check

the web information on your vehicle to determine your door

lock system type. If your vehicle has a negative triggered door

lock system, follow the steps below. If your vehicle has any other

type of door lock system, please contact Hornet Technical

Support to obtain the correct door lock wiring diagram.

Locate the suspected lock wire, and with the red meter lead still

secured to a (+)12 volt source, probe the suspect wire with the

black lead of the meter. Press the door lock switch to the lock

position and watch the meter display. The correct wire will show

a 10.00 to 12.00 volt pulse when the switch is pressed.

Once the correct wire has been found, solder the small LIGHT

GREEN wire off the main connector to it and cover the connec-

tion with electrical tape.

Advertising