Hamilton Electronics A 6436 IBS - Manual (Page 24)

PACKAGE ONE - MAS G 3260 TS IBS MAS
A
FRAMING DIMENSIONS STANDARD FEATURES STANDARD CODES
B CD
32 60 15 16
High gloss gelcoat finish
One piece design
Tri-fold Removable seat
Stainless steel grab bars
UPC/SKU NUMBERS
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model. NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
ANSI Z124.1
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
1” 5” 3” 3”
4 8 4 8
Right Hand Valve:
MAS COMPLIANCE REQUIREMENTS
6” x 6” minimum opening
in floor for drain
connection
No modifications accepted (Packaged units only)
MASSACHUSETTS
ARCHITECTURAL
ACCESS BOARD
MAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.
For MAS compliance installed accessories must include: Removable seat at head end, two peened horizontal grab bars on the back
wall, pressure balancing mixing valve, hand held shower with 30” slide bar, vacuum breaker and 60” hose. Unit and accessories
must be installed per MAS and Praxis guidlines.
: e t a D : d e n g i S Contact Phone Number: CONTRACTOR CONTRACTOR
THIS ORDER WILL NOT BE PROCESSED UNLESS THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS
PROVIDED.
ATTENTION PLUMBING CONTRACTOR!!!
Customer Service: (800)-443-7269 Fax: (731)-925-0379