Hamilton Electronics A 6436 IBS - Manual (Page 42)

No modifications accepted (Packaged units only)
PACKAGE ONE - MAS G 6017 TS FB IBS 2P MAS
A
FRAMING DIMENSIONS STANDARD FEATURES STANDARD CODES
B CD
32 60 16” 16
High gloss gelcoat finish
Two piece design
Removable seat
Stainless steel grab bars
UPC/SKU NUMBERS
Confirm any requested loose accessories desired by circling the items on page one.
Submittal drawing required for Prepackaged model.
NO MODIFICATIONS ACCEPTED.
All built to order model configurations and submittal drawings must be ordered.
ANSI Z124.1
ASTM F463
ASTM E84
SBCCI
NAHB
UPC
Left Hand Valve:
1” 1” 1”
4 2 2
Right Hand Valve:
For MAS compliance: removable seat securely mounted at head end, two horizontal grab bars mounted on the back wall. Pressure
balancing mixing valve, hand held shower with slide bar, vacuum breaker and 60” hose.
Unit and accessories installed per MAS and Praxis guidlines.
MAS COMPLIANCE REQUIREMENTS
6” x 6” minimum opening
in floor for drain
connection
: e t a D : d e n g i S Contact Phone Number: CONTRACTOR CONTRACTOR
THIS ORDER WILL NOT BE PROCESSED UNLESS THIS
DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS
PROVIDED.
ATTENTION PLUMBING CONTRACTOR!!!
Customer Service: (800)-443-7269 Fax: (731)-925-0379
MASSACHUSETTS
ARCHITECTURAL
ACCESS BOARD
MAS
(when fully equipped)
Unit configured with standard
features, pressure balanced
control valve and hand held
shower package.