Hitachi DVP745U - Manual (Page 11)

The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
Press ZOOM during playback.
• Playback will continue.
Press ZOOM repeatedly to select the required
zoom factor: x2, x4 or OFF.
Use Arrow ( L / K / B / s ) to move the zoomed
picture across the screen.
To exit zoom mode, press ZOOM.
NOTES:
• Zooming function does not work while disc menu is
shown.
• x4 zoom is not available on some discs.
4
3
2
1
DVD
– 11 – EN
During playback, press g or h repeatedly to
select the required forward or reverse speed.
• For DVDs, fast forward or reverse search speed is dif-
ferent depending on the disc. Approximate speed is
1(x2),2(x8),3(x50),4(x100).
• For Audio CDs, the approximate speed is x16.
• For MP3, the approximate speed is x8.
• If you are using SKIP/FR or FF/SKIP on the front
panel, press and hold it for more than 1.5 sec (the
longer you hold it, the faster the speed will be)
. When
you reach the desired speed, release the button.
To return to normal playback, press PLAY. 2
1
MP3 CD DVD
Fast Forward / Reverse Search
During playback, press PAUSE/STEP.
Press g
g or h h .
• Slow motion playback will begin and sound will be
muted.
Press g g or h h repeatedly to select the
required speed.
• Slow forward or reverse speed is different depending
on the disc. Approximate speed is 1(1/16),2(1/8),3(1/2).
• If you are using SKIP/FR or FF/SKIP on the front
panel, press and hold it for more than 1.5 sec (the
longer you hold it, the slower the speed will be)
.
When you reach the desired speed, release the
button.
To return to normal playback, press PLAY.
NOTES:
• Set STILL MODE to FIELD on the Display menu, if pic-
tures in the slow playback mode are blurred.
(refer to page 15)
4
3
2
1
DVD
Slow Forward / Slow Reverse
Zoom
There are three ways to begin playback of an Audio CD at a
specific Track.
Using the Numerical buttons
Press numerical buttons to enter the desired
Track number.
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number
(eg. track 3, press 3).
• To play track 26, press +10, 2, 6 on the numerical button.
Using the SEARCH MODE
Press SEARCH MODE.
• The Track search display appears.
Within 30 seconds, select a desired track number using
numerical buttons. For single digits press “0” first.
• Playback will start at the selected track.
Using the SKIP H H G G
During playback, press SKIP G G to move to the next track.
Press it repeatedly to skip subsequent tracks. Press SKIP H H
to go back to the beginning of the current track. Press it repeat-
edly to go to the previous tracks.
• Track number will appear briefly on the front display panel.
• If SKIP H
H or G G is pressed while the playback is
paused, the playback will be paused again after skipping
to the next track.
NOTE:
• SKIP H G are not available when playback is stopped.
2
1
1
MP3 CD
PLAYING A DISC
Press SEARCH MODE once for the Chapter search,
twice for the Title search during playback.
Enter the desired chapter/title
number using numerical but-
tons.
2
1
DVD
Title / Chapter Search
During playback, press SEARCH MODE three times
(CD: twice) to display the Time search on the TV
screen.
Within 30 seconds, enter a desired disc time using
numerical buttons.
• Playback will start at the specified time.
•
Press CLEAR to erase the incorrect input.
NOTES:
• When there is no need to enter a number, “0” appears
automatically. For example, “0:0_:_ _” appears in the
Time Search display if the total time of the disc is less
than 10 minutes.
2
1
CD DVD
Time Search
/2
Track Search
During playback, press STOP.
• Resume message will appear on the TV screen.
Press PLAY, playback will resume from the point
at which playback was stopped.
• To cancel resume, press STOP twice.
NOTES:
• For MP3, playback will resume from the beginning of the
current track.
• The resume information stays on even when the power
is turned off.
2
1
MP3 CD DVD
Resume
E5911UD .qx4 04.1.28 3:47 PM Page 11