Hitachi DVP745U - Manual (Page 6)

REAR VIEW
1 2 3 4 5 6 7 8
9
10 12 13 14 11
FRONT PANEL
1. y /I (POWER/STANDBY)
Switch the player to ON or OFF.
(As to the indication of the Operate switch, “I” indicates
ON and “y” indicates electrical power STANDBY.)
2. SKIP/FR
Go to previous chapter or track during playback.
Press and hold for 1.5 seconds for a reverse search.
3. PLAY
Start or resume disc playback.
Press to switch progressive scanning mode and
interlace mode. (refer to page 5.)
4. FF/SKIP
Go to next chapter or track during playback.
Press and hold for 1.5 seconds for a forward search.
5. STOP
Stop playback.
6. OPEN/CLOSE
Open/close the disc tray.
7. Disc tray
8. Display
FUNCTIONAL OVERVIEW
9. MAIN (AC Power Cord)
Connect to a standard AC outlet.
10. COAXIAL (Digital audio out)
Use coaxial digital audio out to connect to a compatible
Dolby Digital receiver. Use to connect to a Dolby Digital
decoder or DTS decoder.
11. AUDIO OUT (Left/Right)
Connect to the AUDIO inputs of an amplifier, receiver or
stereo system.
12. VIDEO OUT
Use a video cable to connect one of the jack to Video
input on your A/V-compatible TV, wide screen TV, or
Stereo system.
13. COMPONENT VIDEO OUT
Connect to a TV with the Component video in jacks.
14. S-VIDEO OUT
Use the S-Video cable to connect this jack to the S-
Video jack on your A/V-compatible TV or wide screen
TV for a higher quality picture.
Caution: Do not touch the inner pins of the jacks on the
rear panel. Electrostatic discharge may cause permanent
damage to the player.
– 6 – EN
[Fig. 1]
[Fig. 2]
E5911UD .qx4 04.1.28 3:47 PM Page 6