Harman-Kardon FL8550 - Manual (Page 10)

Remote Control Functions
8
a Open/Close Button: Press this
button to open or close the disc
drawer. The drawer may also be
closed by pressing the
Play button
$ h. Do not push the drawer, as
damage to the transport mechanism
may result.
b Disc Select Buttons: Press one
of these buttons to select the disc in
a specific position in the CD drawer.
c Numeric Buttons: Press these
buttons to select a specific track on
a disc. The FL8550 will immediately
go to the track and begin to play it.
For tracks 1 through 10 on a disc,
you need only press the desired
number. For tracks 10 and above,
press the
+10 button d to select
the first digit of the track number,
and then press the second digit
from these numeric buttons. These
buttons are also used to enter track
numbers into the memory for pre-
programmed play lists. (See page
14 for complete information on
programming the FL8550.)
d +10 Button: Press this button to
select the first digit of a track number
above 10. Each press of the button
increases the first digit one increment.
Press it once to start accessing tracks
10 through 19, twice to start access-
ing tracks 20 through 29, and so forth.
For example, to select track 22, press
the
+10 button twice, and then press
the 2 button c.
e Search Buttons: Press these
buttons to search forward — or
backwards ‚ through a disc to
locate a particular portion of the
selection being played.
f Skip Buttons: Press one of these
buttons to move to the next track fl·,
or to move back to the previous track
‡fi on the disc being played.
g Stop Button: Press this button to
stop the disc currently being played.
h Play Button: Press this button to
start the playback of a CD. If the CD
drawer is open, pressing this button
will automatically close the drawer.
i Random Button: Press this
button to put a disc into play, and
to have all of the tracks played in a
random order. (See page 11 for
more information.)
j Pause Button: Press this button
once to momentarily pause a disc.
When the button is pressed again,
the disc will resume play at the point
it was paused.
k Intro Button: Press this button
to put the FL8550 into the Intro Scan
mode. When you press this button,
the unit will play the first 15 seconds
of each track on the disc, and then
move to the next track. Press the but-
ton again to defeat the function and
continue full play of the current track.
(See page 13 for more information.)
l Time Button: In normal
operation, the display will show the
running time of the track being
played. Press the button once to
check the time remaining for the
track in play. Press the button again
to view the total play time remaining
for the disc in play.
m Clear Button: Press this
button to remove tracks from a
programmed sequence. Each
press of the button will remove
one track, starting with the last
track programmed to play. (See
page 13 for complete information
on programming the FL8550.)
n Program Button: This button
is used to program the playback of
a disc in a particular order. (See
page 14 for complete instructions
on programming the FL8550.)
o Repeat Button: Press this button
once to constantly repeat the track
currently being played. Press it a sec-
ond time to repeat the entire disc. (See
page 15 for more information.)
p Disc Skip Button: Press this
button to change to the next disc. If
a disc position is empty, the FL8550
will automatically search for the next
position that contains a disc.