Harman-Kardon FL8550 - Manual (Page 17)

Programmed Play Operation
Repeat Play
The FL8550’s programming system
enables you to repeat either all of the
tracks on all of the discs, a complete
single disc or a single track.
Repeat Track Play
To repeat a single track, press the
Repeat button 7 o while the desired
track is playing so that the REPEAT 1
indicator is lit. The desired track may
also be selected using the
Disc Select
buttons ( b and then the Skip but-
tons ^ f . When the track is chosen,
press the Repeat button 7 o and the
Play button $ h . The track will play
until the Stop button % g is pressed.
Repeat Disc Play
To repeat an entire disc, press the
Repeat button 7 o twice so that the
REPEAT 1 DISC indicator is lit. Press the
Disc Select buttons ( b until the
desired disc’s icon is surrounded by a red
line and the disc number appears in the
Information Display. The selected disc
will play through to the end, and then
continue to repeat until the
Stop button
% g is pressed.
Repeat All Discs
To repeat all of the discs that have been
loaded into the FL8550, press the
Repeat
button 7 o three times so that the
REPEAT ALL DISCS indicators are lit.
Press the Play button $ h , and the
unit will play all tracks on all discs, start-
ing with the disc that has been loaded in
the play position. When all discs have
played through, the sequence will repeat
and the discs will continue to play until
the
Stop button % g is pressed.
NOTE: You may cancel a repeat function
any time by pressing the
Repeat button
7 o until the REPEAT indicators go
out. The player will continue with normal
play and then stop when the current disc
is finished playing.
15