HiFi Works 811-TK5M91-031 - Manual (Page 11)

- 10 -
AM
Connect the loop aerial (provided) to the 'AM
LOOP aerial' snap terminals at the back of the
unit.
FM
Fully unwind the wire aerial. Then extend the wire
aerial and place it in the position that receives
best reception.
NOTE: Do not connect to an outside aerial.
FOR BETTER RECEPTION
TUNING INTO A STATION MANUALLY
The system can store a total of 60 stations. (30 FM and 30 AM ). Presetting allows you to tune in to a station
directly.
2. Press the STOP/BAND
button to select the desired
band.
3. Tune into a station using the
tuning buttons. “STEREO” will
appear when an FM broadcast
is in stereo.
F U N C T I O N F U N C T I O N S TO P/ B A N D
R E P E AT
R A N D OM
T U N I N G
If the FM stereo broadcast signal weak and there is hiss when you listen
Press the PLAY/PAUSE button, so that the “STEREO” disappear on the display. Press the PLAY/PAUSE
button again, so that the "MONO" disappear on the display.
To search for a station quickly
Hold the
TUNING buttons and tuning will automatically stop when a station is found.
However, if the signal is weak the automatic search may not find any stations. In this case, search for
the station manually.
After use:
Press the STANDBY/ON button to turn the power off.
Note
The last station tuned in will be recalled, even after changing the tuning band or the function, or after turning
the power off.
1. Press the FUNCTION button
to select TUNER, function
“TUNER” will appear in the
display.