HiFi Works 811-TK5M91-031 - Manual (Page 9)

- 8 -
SETTING THE CLOCK
Notes:
•
The clock starts operating from “0” seconds.
(Seconds are not displayed.)
• In the event of a power failure or when the AC
power lead is disconnected, the clock display
will go out.
When the AC power supply is restored, the
clock display will flash on and off to indicate the
time when the power failure occurred or when
the AC power lead was disconnected.
• You can only set the clock in standby mode.
1. In standby mode press the PLAY/PAUSE
button.
2. Use the MULTI JOG knob to adjust day
MON, TUE, WED, THU, FRI, SAT or SUN.
3. Press the PLAY/PAUSE button and use the
MULTI-JOG to adjust the hour.
4. Press the PLAY/PAUSE button and use the
MULTI-JOG to adjust the minute.
5. Press the PLAY/PAUSE button use the MULTI-
JOG. Select either 24 hour/12 hour format.
6. Press the PLAY/PAUSE button and use the
MULTI-JOG to adjust the clock on and off.