Harbor Freight Tools 92966 - Manual (Page 2)

Page 2 SKU 92966 for technical questions, please call 1-800-444-3353.
Specifications
Machine Type Heavy duty, industrial sewing machine; high speed, single needle-lock stitch
Drive V-belt driven
Action
Foot pedal operation, along with a knee and manual lifting arm for presser foot.
Presser tension adjustment
Feed Type Link style needle feed reduces slippage
Sewing Directions Forward and reverse feed
Machine Dimensions 20- 3 /
4
” L x 10” H
Accessories
- 2 Screwdrivers
- 3 Bobbins
- Small lubricating bottle with tip
- Spare needles
- Power Switch
Table Stand Kit Table Stand Kit (Model 03929) not included
Stitching Speed 2,000 SPM
Motor Type
Clutch motor; 1,725 RPM, 5.8/2.9 amps, 110/220 VAC, 60 Hz;
single phase
Sewing Thickness up to 3 /
8
” leather
Overall weight 56 lb.
Caution: Make certain that the voltage switch on the motor is set correctly for your
use. See page 6. this Machine requires oil to be added before use -see page 6
for details.
Save this Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and precautions
WARNiNg: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
use the right product for the job. Do not attempt to force a small product or attach-
ment to do the work of a larger industrial tool. There are certain applications for which
1.
2.
3.
4.
5.
REV 07/05