HP AFICIO SP 8100DN - Manual (Page 106)

95
7. Adjusting the Printer
Adjusting the Image Density
You can adjust the image density using the control panel if the image density is
not appropriate.
A
Press the {Menu} key.
B
Select [Maintenance] using {T} or {U}, and then press the {q Enter} key.
C
Select [Image Density] using {T} or {U}, and then press the {q Enter} key.
D
Specify the image density using {T} or {U}, and then press the {q Enter}
key.
You can specify the image density in the range of -3 to +3.
AQV251S