HP AFICIO SP 8100DN - Manual (Page 31)

Installing Options
20
2
Attaching Printer Hard Disk Drive Type 8100
R CAUTION:
Important
❒ Before installation, be sure to remove all SDRAM modules from the controller
board to prevent from damaging them.
❒ Before touching the hard disk drive, touch something metal to discharge any
static electricity. Static electricity can damage the hard disk drive.
❒ Do not subject the hard disk drive to physical shocks.
❒ Before using the new hard disk drive, be sure to make the settings in the print-
er driver.
A
Check the package contains the following:
❖ Hard Disk Drive
❖ Flat Cable
• Do not touch the inside of the controller board compartment. Doing so may
cause a machine malfunction or a burn.
AQV518S
AQC500S