Husqvarna TS 66 R - Manual (Page 27)

19
Before leaving our factory every machine passes an exacting inspection programme in which everything is chec-
ked minutely.
Following the instructions will ensure that your machine gives long service, in normal operating conditions.
The user advice and spare parts mentioned in this document are given as an indication, and do not constitute
an undertaking. No warrantee will be granted in the event of errors or omissions, or for damage occurring during
delivery, or caused by the design or use of the machine. We are very concerned about the quality of our pro-
ducts and we reserve the right to make any technical modifications to improve them, without warning.
This document will:
• provide the user with: information about the machine
• information about its possible uses
• prevent accidents due to unsuitable use, by an untrained person, during maintenance, repairs, ove-
rhauls, handling or transport
• improve the reliability and durability of the machine
• ensure correct use, regular maintenance, and fast fault finding in order to reduce repair costs and down-
time.
PREFACE TO THE MANUAL
The use of symbols on machines (in color) and in the manual identify advice concerning your safety.
The manufacturer declines any responsibility resulting from improper use, or modifications.
OBLIGATION xx
☛
xx Blue background, white marking : obligatory safety
OBLIGATIONxx ☛ xx + red marking : movement forbidden
WARNING xx
☛
xx Black triangle and marking on a yellow background : danger if not adhered to.
Risk of injury to the user or third parties, with possibility of damage top the
machine or the tool.
PROHIBITION xx
☛
xx Red circle with or without bar : use or presence prohibited.
INFORMATION xx
☛
xx Information - Instruction: special instructions concerning use and inspection.
GENERAL SAFETY INSTRUCTIONS
The manual should always be available at the place of work.
It should be read and used by any person installing or using the machine.
The obligatory technical regulations in force in the country where the machine is used must also
be adhered to for maximum safety.
English