HP AA-RTDRB-TE - Manual (Page 132)

Error Messages
132 Embedded Web Server User Guide
Error 211: Duplicate
Zone
Two or more zone names
in the local zone set are
identical.
All zone names must be
unique. Make the
appropriate changes and
resubmit.
Error 212: Duplicate Zone
Member
A member was added
that already exists in the
zone.
No action necessary.
Error 213: Number of
Zones Is Zero
You are attempting to
activate and empty zone
set.
The zone set must have at
least one zone to be
considered valid. Add a
valid zone to the zone set
and resubmit.
Error 214: A Zone
Contains Zero Members
You are attempting to
activate a zone set that
contains at least one zone
with zero members.
Each zone in the zone set
must contain at least one
member. Add a valid
member to the empty
zone and resubmit.
Error 215: Zone Set Size
Exceeded
The local work area zone
set has outgrown the size
limitations imposed by the
Command Line Interface.
Reduce the size of the
zone set to meet CLI
requirements. This can be
a reduction in the number
of zones in the zone set, a
reduction of members in a
zone, or a reduction of
zone name lengths.
Error 218: Invalid Port
Number
The value entered for the
port number is invalid
Enter a port number
within the range
supported by your
director or switch. Valid
values are:
0-15 for the
Edge Switch 2/16
0-23 for the
Edge Switch 2/24
0–31 for the
Edge Switch 2/32
0–63 for the
Director 2/64
0–127 and 132–143 for
the Director 2/140
Table 9: Embedded Web Serve Messages (Continued)
Message Description Action