HP 35s Scientific Calculator User Manual
Page 261
16-15
Flags Used:
None.
Remarks:
The accuracy of this program is dependent on the display setting. For inputs in the
area between ±3 standard deviations, a display of four or more significant figures
is adequate for most applications.
At full precision, the input limit becomes ±5 standard deviations. Computation time
is significantly less with a lower number of displayed digits.
In routine Q, the constant 0.5 may be replaced by 2 and
.
You do not need to key in the inverse routine (in routines I and T) if you are not
interested in the inverse capability.
Program Instructions:
1. Key in the program routines; press
when done.
2. Press
S
.
3. After the prompt for M, key in the population mean and press
. (If the
mean is zero, just press
.)
Returns to the calling routine.
Checksum and length: B3EB 31
Program Lines:
(In RPN mode)
Description