Miscellaneous event buttons, Message event buttons (pro-link) – Home Automation HOME AUTOMATION User Manual

Page 70

Advertising
background image

Finally, you are prompted to specify the command that activates the event button:

WHEN X-10 A1:

0=OFF

1=ON

2=SCENE


After specifying the X-10 House Code and X-10 Unit Code, select 0 for Off, 1 for On, or 2 for Scene.

"Off" events will be activated whenever the selected device is turned off. "On" events will be activated whenever the selected
device is turned on. "Scene" events will be activated whenever the selected device is set to the specified scene. "On" events will
also be activated whenever the selected device is set to a scene other than off.

Miscellaneous Event Buttons

Pressing the 7 (MISC) key allows you to select an event button from a list of other event buttons. You are first prompted to select
the event button:

SELECT

BUTTON:

WHEN PHONE DEAD


The arrow keys are used to select from a list of event buttons:

WHEN ENERGY LO

WHEN ENERGY MID

WHEN ENERGY HI

WHEN ENERGY CRIT

WHEN PHONE DEAD

WHEN PHONE RING

WHEN PHONE OFFHK

WHEN PHONE ONHOOK

WHEN AC PWR OFF

WHEN AC PWR ON

WHEN BATTERY LOW

WHEN BATTERY OK

WHEN DCM FAIL

WHEN DCM OK

WHEN CAMERA* (PA Access only)


*When a camera input (1-6) is pressed on an OmniTouch with Video. This item can only be programmed via PC Access.


Message Event Buttons (Pro-Link)

Pressing the 8 (MSG) key allows you to select an event button from a list of the 64 text messages. You are first prompted to
select the message:

MESSAGE:

ENTER MESSAGE


The message may be entered by entering the message number followed by the ' # ' key or by using the arrow keys to scroll
through the list of messages.

Page 62

Advertising
This manual is related to the following products: