Home Automation HOME AUTOMATION - Manual (Page 73)

Select (0-6) to arm the system into the desired mode or select the 8 key to Bypass and the 9 key to Restore a security zone. If area
arming is being used, the display will then prompt you for the area to be armed:
AREA
ENTER AREA 0=ALL
↓
Enter the area number followed by the ' # ' key, or use the arrow keys to scroll through a list of areas. Press the ' # ' key first to
specify all areas.
Program Button Commands
Select the 3 (BUTTON) key to program a macro button. Specify the macro button to be executed - See Button Programs.
BUTTON:
ENTER BUTTON #=MENU
↓
Program All On / All Off Commands
Select the 4 (ALL) key to program All Lights On and All Units Off commands. It is also used to program Leviton Scenes, UPB
Link, RadioRA Phantom Button, or CentraLite Scene.
ALL
0=OFF 1=ON 2=SCN 3=LINK
↓
ALL
4=PHANTOM 5=CENLIT
↑
If area arming is being used, the display will then prompt you for the area to control. Enter the area number followed by the ' # '
key, or use the arrow keys to scroll through a list of areas. Press the ' # ' key first to specify all areas.
Program Video Commands*
This program command is used to display video automatically on an OmniTouch with Video touchscreen when an event occurs.
You can specify which camera and which touchscreen(s) will display the video when the event takes place. When the event takes
place, it switches each of the specified touchscreens to full screen video.
* This item can only be programmed via PC Access.
Program Temperature Commands
Select the 5 (TEMP) key to control HAI Communicating Thermostats, energy saver modules, and temperature sensors. Specify
the desired command - See Temperature.
TEMPERATURE:
ENTER TEMP ZONE 0=ALL
↓
Program Energy Cost
Select the 6 (ENERGY) key to command the energy cost rate. Specify the desired energy cost rate:
ENERGY COST:
0=LO 1=MID 2=HI 3=CRIT
Page 65