Hitachi JPEG2000 - Manual (Page 31)

JPEG2000 Stand alone DVR User Guide
- 31 -
4-3-4 Interval setup
1.[SWITCH INTERVAL]
FULL- Full Screen Sequence Interval setup. (Range: 1~99 SEC)
PIP- Picture in Picture, the sub-picture’s sequence interval setup. (Range:
1~99 SEC)
2.[EVENT RECORD]
Event Update Time is to avoid the DVR from recording the event logs from the
same event. The event types include alarm, motion and video loss. When an
event is triggered, it is possible that the same event keeps on being triggered
for a period of time. With the help of Event Update Time, whenever there is an
event, the DVR records the starting time and information of the event in the
Event Log, and ignores the following events within the duration set in the Event
update time. The setting range of the Event Update time is from 10 seconds to
990 seconds.
4-3-5 Alarm setup
1.[CHANNEL]
Use [+] and [-] to select a channel.
2.[ALARM INPUT]
Set up the Alarm Input type.
N.C- when the alarm is triggered, the circuit turns closed (ON).
N.O- when the alarm is triggered, the circuit turns opened (OFF).
3.[DURATION]
Set up a post- alarm recording duration and the alarm output duration. The
duration setting is applied to both functions. The setting range is from 1 second
to 300 seconds.
Note: Alarm output can be triggered by alarm input and video loss. Motion cannot trigger an alarm output.