Hitachi JPEG2000 - Manual (Page 78)

JPEG2000 Stand alone DVR User Guide
- 78 -
Upgrade firmware
Update procedures
Step 1、Update BOOT
1. Connect the USB port between DVR and PC.
(Do not power on DVR in advance)
2. Execute USB update program AUDTOTAL，select “Boot” then choose the file: _FBoot_0000_16M_V2.04.bin
3. Press and hold SEARCH and PLAY and power on the DVR.
4. When the DVR is powered on, you will hear very short beeps. Keep holding the “SEARCH” and “PLAY” buttons.
When the beeps turn slow and the “Send” icon of the program, J2000 USB Downloader, becomes active, release
the buttons
5. Click SEND for transmission. After transmission, the DVR will reboot automatically. When DVR shows HDD
detection message, power off DVR.
Step 1 update BOOT
Step 2 update F/W
Start
Update Boot
Update F/W
Finish Finish the update procedures
Start to update