Hamilton Beach 70450C - Manual (Page 6)

Processing Using Chopping/Mixing Blade
The Chopping/Mixing Blade can be
used to coarsely chop, finely mince,
mix, or puree food to a smooth consis-
tency.
1. Make sure the Control Switch is turned
to OFF and the unit is unplugged.
2. Lock the bowl onto base. (See “How
to Lock the Bowl” on page 5.)
3. Place the Chopping/Mixing Blade
onto motor shaft of food processor in
center of bowl. Turn slowly until blade
drops into place. Handle carefully:
the blade is sharp.
4. Lock cover onto bowl. (See “How to
Lock the Cover” on page 5.) Insert
food pusher into food chute.
5. Plug in unit and process food.
The processing time will determine
the finished consistency of the food.
The Pulse setting can help you avoid
overprocessing.
NOTES:
• Always use the food pusher to feed
food into the chute. NEVER PUSH
FOOD THROUGH CHUTE WITH
HANDS.
• Wait until blade has stopped rotat-
ing before removing cover. Chopping/
Mixing Blade
Motor
Shaft
6
840122300 Ev03.qxd 1/6/04 11:30 AM Page 6