Heath Zenith Motion Sensing Diecast Lantern HB-4190 Series - Manual (Page 4)

4 595-5770-05
COMPLETE THE INSTALLATION
Model 4193 Glass Installation
❒ Model 4193 only: install the six pieces
of glass by sliding them down as shown.
The glass panels should rest upon the
corner guides on each side, and against
the rubber bumpers at the bottom.
Note: As with any glass, handle with care.
Corner
Guides
Rubber Bumpers
COMPLETE THE
INSTALLATION
❒ Stuff the wires into the junction box. Make
sure none of the wires get pinched.
❒ Install one 100 Watt max. light bulb, or
three 60 Watt bulbs in candelabra style
(60 Watt bulb(s) included).
❒ Install the fixture top. Secure with
decorative screws.
❒ After completing the tests on page 5,
caulk fixture mounting surface with
silicone weather sealant.
Slide the fixture onto
the mounting screws
and tighten nuts.
Junction Box