HP 2425 User Manual
Page 85
6WDWXV0HVVDJHV
7URXEOHVKRRWLQJ3ULQWHU3UREOHPV
END JOB
The Cancel key has been
pressed.
Press Select to
provide an end-of-
job indicator for a
print job that does
not have one
CLOSE ENGINE DOOR(S)
One or more of the front or
side covers is open and
must be closed.
Close the front or
side covers.
DUPLEXER ABSENT
The optional duplexer unit
is not installed.
DUPLEXER JAM
Media has jammed while
passing through the
duplexer.
Locate and clear the
media jam. See
“Media Jams” on
page 6-18.
EXTENDED ACCOUNTING
FILE SIZE
The size of the non-empty
accounting file has been
increased successfully.
FINISHER STAPLE JAM
The Stackler has a staple
jam.
Use the instructions
in “Media Jams” on
page 6-18 of this
chapter.
IDLE
The printer is on line, but
no jobs are in process.
ILLEGAL DUPLEX
PRINTING
The optional envelope
feeder was selected as the
input bin and the duplexer
as the output bin. The
printer does not support
duplexing envelopes.
Access Operator
Control/Duplex via
the control panel
and set Duplex to
Off.
ILLEGAL MANUAL FEED
PRINTING
Media has been inserted
in the manual feed slot
before the paper tray lifting
mechanism is in the ready
position.
Remove the media
and reinsert it.
INITIALIZING
The printer is getting ready
to go on line.
This status message...
means...
do this...