HotBrick Dual WAN Firewall VPN 1400/2 - Manual (Page 55)

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966
 Policy Name List – When adding a new Policy, ignore this list. To edit an existing entry, select it from
the list and then click the "Select" button. The data fields will be updated with data for the selected
entry.
 Policy Name – Enter a suitable name. Generally, you should use the "Policy Name" for the network
traffic type for ease of identification.
 Source Address – Define the source address of packets here. It has two types: IP address or MAC
address. If you select IP address you can define the IP address range; otherwise you can define
up to four MAC addresses.
 Destination Address – Define the destination address of packets here. The explanation is as the same
as above.
 Protocol Type – The field defines traffic packet type, i.e. IP, TCP and UDP.
 Source Port – Define the source port of the packets here.
 Destination Port – Define the destination port of the packets here.
 Priority Queue – Determines if a packet meets all conditions defined above and will be serviced with a
defined priority level.
55