Product overview, Front panel back panel, Front panel – HP MP200 User Manual
Page 8: Back panel
4
5
Product overview
front Panel
1
2
3 4
5
LED/button/connector:
USB port:
1.
These two USB 2.0 type A sockets can be used to connect an external
USB Flash Drive, USB Hard Drive, USB DVD-ROM, or USB Flash Card Reader.
IR sensor:
2.
This is the port that receives commands from the remote control. Please
make sure not to block the port.
USB indicator:
3.
When plugging in a USB device, it may take up to 5 seconds for it
to become ready.
Power indicator:
4.
Lights up when the power is plugged in, and the device is turned
on.
POWER STANDBY:
5.
Press this button to put the mp200 into standby or to wake it
up from standby.
Back Panel
Video connection: Please select one of the following connections in order to connect
the mp200 video to your TV set.
HDMI output: This high definition port can be used to connect the mp200 with your