HHB comm PERSONAL COMPACT DISC RECORDER CDR 830 - Manual (Page 45)

1 POWER SWITCH
Turns power to the unit on and off.
2 SCROLL
Displays any CD Text information (if
recorded), by scrolling the information across
the display.
3 DISPLAY - BUTTON
Selects the different time display modes -
elapsed track time, remaining track time,
total disc playing time, etc..
4 TITLE/MODE
Selects the different name display modes;
DISC NAME, ARTIST NAME and TRACK
NAME if recorded.
5 MONITOR
Enables the user to monitor the input signal
prior to recording. This is possible even
without a disc in the machine.
6 OPEN/CLOSE
Press to open or close the disc loading tray.
7 RECORD
For manually starting recording.
8 REC MUTE
For creating 4 seconds or more of silence at
the end of a recording.
9 ANALOG REC LEVEL
Used for adjusting the level of the analogue
input source.
10 DIGITAL REC LEVEL
Used for adjusting the digital recording level,
also accessing and setting the MENU
functions and AMS track search.
11 ERASE
Allowing user to erase CD-RW discs - last
track, range of tracks, TOC (un-finalize) and
INITIALISE (complete physical erase of whole
CD-RW).
12 FINALIZE
For making recordings Red Book compatible
so that they can be played back in any CD
player.
13 AUTO/MANUAL
Switches between automatic and manual
track numbering modes.
14 INPUT SELECTOR
Selects the analogue, digital coaxial or digital
optical input for recording purposes.
15 DISPLAY - SCREEN
Shows recording and playback levels, disc
and track time information, CD Text, selected
input and other useful system information.
16 TRANSPORT CONTROLS
Allowing playback, pause, FF, REW and STOP.
17 TEXT
Allows the naming of the DISC, and the
ARTIST, and also individual TRACK names,
before finalization. This information is stored
on the disc once finalized and can be read
back by any CD Text compatible CD player.
18 SYNCHRO
Allows automatic starting of recording from
various sources, both digital and analogue.
This is intended to simplify direct cloning of
various source material [SYNC-1; SYNC-ALL;
SYNC-FINAL].
19 MENU/DELETE
Is used to access the various MENU page
functions and delete characters in CD text
mode. [MENU: COPY; FADER; T.INC; A.LVL;
D.VOL; BALANCE].
20 PHONES - LEVEL
Headphone socket (
1/4
”) and headphone level
control.
QUICK REFERENCE GUIDE
www.hhb.co.uk
HHB Communications Ltd · 73-75 Scrubs Lane, London NW10 6QU, UK
Tel: 020 8962 5000 · Fax: 020 8962 5050 · E-Mail: [email protected]
HHB Communications Canada Ltd· 260 King Street East, Toronto, Ontario M5A 4L5, Canada
Tel: 416 867 9000 · Fax: 416 867 1080 · E-Mail: [email protected]
FEATURES & FUNCTIONS
COMPACT DISC RECORDER
1. Insert a recordable disc
2. Press TEXT to select DISC NAME or ARTIST NAME. After about 2 seconds, a flashing cursor will
appear at the left hand side of the display.
3. Rotate the DIGITAL RECORD LEVEL ( 9 :) control to find a character, then press the same control
to select and move the cursor one space to the right. Repeat this procedure until finished, then
press TEXT to store the information.
Note: it is possible to use the TITLE/MODE button as a shortcut for accessing lower case, upper
case and digit/symbol characters.
4. Confirm that the TEXT has been stored by pressing the TITLE/MODE button.
5. To write a TRACK NAME, select the relevant track using 9 :, then press TEXT. After about 2
seconds, a flashing cursor will appear at the left hand side of the display.
6. Rotate the DIGITAL RECORD LEVEL ( 9 :) control to find a character, then press the same control
to select and move the cursor one space to the right. Repeat this procedure until finished, then
press TEXT to store the information.
7. Confirm that the TEXT has been stored by selecting the track and then pressing the TITLE/MODE
button.
8. CD Text can also be entered from the remote control (see page 30 of the operations manual).
HOW TO WRITE CD TEXT
1. Insert the recorded CD-R or CD-RW which you want to finalize. Note: many CD players are unable
to read CD-RW type discs even when finalized.
2. Press FINALIZE and then wait for the display to show approximately 2 minutes on the counter.
3. Press PLAY to start finalization. This process takes approximately 2 minutes. Do not disturb the
CDR830 during finalization. You may notice the count down pause temporarily during finalize - this
is normal.
HOW TO MAKE A DISC PLAYABLE IN A STANDARD CD PLAYER - FINALIZE
• COPY [PERMIT; ONCE; INHIBT]
• FADER [1 to 12 seconds]
• T.INC [OFF; 1min; 3min; 5min]
• A.LVL [-78 to -24dB]
• D.VOL [-84 to +20dB]
• BALANCE [ L>C>R; 29 steps]
MENU FUNCTIONS
PEX1017-A
1
5
6 7 8
2 3 4
9 10
12 11 13 14 15
16 17
18
19
20
16
CDR830.QXD 16/11/00 10:51 Page 1