Honeywell RAPID EYE K5404V9 - Manual (Page 14)

View: Operator Guide
1–6
1.4.1 Sites Tab: Toolbar Reference
Table 1
Sites toolbar
Command Function/Session Section
To use the latest Multi database: rights in user account,
sites added, modified or deleted, and so on. 1.3
To display this guide in PDF format. 1.5
To display live video from the site that is selected on the
Sites tab. 2.1.1
To display recorded video, stored at a site. 3.1.2
To search a site for events that are set to be silently
recorded.
10.2
To search for data from customer devices.
11
To search recorded video for motion. Note: works only
if motion detection is enabled before video is recorded.
5
To list alarms, if any, from or about a site. 6.3.1
To set alarms, to configure the connected cameras, and
so on. 6.7
For connecting to a site without running a session;
mostly for dial-up, to save time when starting sessions. n/a
To end the connection to a site, giving you a quick,
one-step way to end all sessions involving that site.
n/a
To list some of the communication settings for a site.
1.2.3
1.5 More About View
Index
The topics in this guide are indexed; see the Index, starting on p. 14–1.
Learning Rapid Eye Multi-Media View
The View procedures that you will use most often are documented in this user guide.
They are grouped by tasks, so that you may start using View as quickly as possible.
Reference information is included as needed, usually at the end of subsections.