Honeywell TE218ELW User Manual

Page 8

Advertising
background image

14

15

TEMPERATURE TREND

The trend indicator shows the trend of temperatures collected

at a particular remote sight.

There are three trends will be

shown: Rising, Steady, and Falling.

MAXIMUM AND MINIMUM TEMPERATURE

The maximum and minimum records of the indoor and

remote temperature will be automatically stored in the

memory.

The main unit will display the minimum, maximum and

the current reading upon each press of the MEM button.

If the MEM button is not pressed, the unit will return to the

current temperature display in 15 seconds.

To clear the memory, press and hold MEM for 3 seconds.

The maximum and minimum readings will be erased.

READING THE KINETIC WAVE DISPLAY

The kinetic wave display shows the signal receiving status

of the main unit. There are three possible forms:

WWVB RADIO CONTROLLED TIME

The NIST (National Institute of Standards and Technology)

radio station is located in Ft. Collins, Colorado.

It transmits the exact time signal continuously throughout

the continental United States at 60KHz. Wireless Indoor/

Outdoor Thermometer can receive this WWVB signal

through its internal antenna from the distance up to 2,000

miles away. Due to the nature of the Earth’s ionosphere,

reception can be limited during the daytime. The radio control

clock will search for a signal every night when reception is

best. The WWVB radio station receives its signal from the

NIST Atomic clock in Boulder, Colorado.
The WWVB tower icon on the main unit's display will flash

indicating radio signal reception from the WWVB radio

station. When the time signal is received, the WWVB tower

icon turns on and the time of the selected time zone will be

displayed. If only the part of the WWVB tower icon turns

on or the WWVB tower does not appear at all and the time

is not set, please consider the following:

*

Make sure the main unit is positioned at 8 feet distance

from any interference source such as a TV, computer

monitors, microwave ovens, etc

*

Within concrete rooms (basements, superstructures, office

buildings), the received signal will be weakened, and the

main unit should be placed close to a window.

* The successful reception of the atomic time signal depends

on the positioning and location of the main unit. Always

place the main unit by the window for better reception.

*

During the night time, the atmospheric disturbances are

usually less severe and reception may be improved.

A single daily reception is sufficient enough to keep the

accuracy reading within 1 second.

Note: In case the radio-controlled clock is not able to detect

the WWVB signal (due to disturbances, transmitting

distance, etc), the time can be manually set and will

be maintained accurately until a signal is available.

Arrow

Indicator

Temperature

Steady

Falling

Rising

The Unit is in searching mode

Temperature readings are

securely registered

No signals.

˚F

Advertising