HONDA WT20X - Manual (Page 32)

30
SERVICING YOUR PUMP
ENGINE OIL CHANGE
OIL LEVEL
DRAIN PLUG
OIL FILLER CAP/DIPSTICK
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
Place a suitable container below the engine to catch the used oil,
then remove the oil filler cap/dipstick and the drain plug.
Allow the used oil to drain completely, then reinstall the drain plug,
and tighten it securely.
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take used oil in a sealed container
to your local recycling center or service station for reclamation. Do
not throw it in the trash, pour it on the ground, or down a drain.
With the engine in a level position, fill to the edge of the oil filler hole
with the recommended oil (see page
).
Screw in the oil filler cap/dipstick securely.
The Oil Alert system will automatically stop the engine before the oil
level falls below the safe limit. However, to avoid the inconvenience
of an unexpected shutdown, fill to the upper limit, and check the oil
level regularly.
0.63 US qt (0.60 )
1.2 US qt (1.1 )
1.
2.
3.
4.
Engine oil capacity:WT20X................
WT30X/WT40X..
31
07/05/29 13:25:31 31YG0600_031