HONDA WT20X - Manual (Page 42)

40
SERVICING YOUR PUMP
Installation:
VOLUTE CASE
PUMP CASING
PUMP COVER
WRENCH
DRAIN PLUG
KNOBS (4)
O-RING
Install the drain plug in the pump cover.
After tightening the pump cover knobs, check the pump cover and
pump casing to ensure that there is no water leakage.
Install the O-ring on the pump cover, taking care not to damage the
O-ring.
Install the pump cover on the pump casing, and tighten the knobs
hand tight. Then, set the wrench to the knobs and finish tightening
the knobs evenly.
1.
2.
3.
4.
02/01/14 13:24:07 31YG0600_041