Harbor Freight Tools CENTRAL MACHINERY 65345 - Manual (Page 18)

Page 18 SKU 65345 For technical questions, please call 1-800-444-3353.
TO prEVENT
SErIOuS INJurY
FrOM AccIDENTAL
OpErATION:
Turn the power Switch (46) of
the Lathe to its “OFF”
position and unplug the
machine from its electrical
outlet before performing any
inspection, maintenance, or
cleaning procedures.
TO prEVENT SErIOuS
INJurY FrOM MAcHINE
FAILurE:
Do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
BEFORE EACH USE, inspect the 1.
general condition of the Lathe.
Check for loose screws, misalignment
or binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
AFTER USE,
2. clean external surfaces
of the tool with clean cloth.
DAILY, lubricate all external moving
3.
parts with ISO 68 or SAE 20W oil.
Lubricate the Tailstock oiling point
4.
every five uses, or once per week if
used frequently.
5. WArNINg! If the power cord
(45) of this Lathe is damaged, it
must be replaced only by a quali-
fied service technician.
pLEASE rEAD THE
FOLLOWINg cArEFuLLY
THE MANUFACTURER AND/OR
DISTRIBUTOR HAS PROVIDED
THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A
REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR
WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED
TO MAKE ANY REPAIRS TO THE
PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS
OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY
THE BUYER. THE BUYER ASSUMES ALL
RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR
HER INSTALLATION OF REPLACEMENT
PARTS THERETO.