Honeywell HD-16DVR-C - Manual (Page 69)

Honeywell
53
 Auto pan
Figure 4-31 Function Menu
Note
 Preset, tour and pattern all need the value to be the
control parameter. You can define it according to the
speed dome’s user manual.
 You need to refer to your speed dome user’s manual for
the auxiliary function definition. In some cases, it can be
used for special processes.
 The following setups are usually performed in the
interfaces shown in
Figure 4-29 , Figure 4-30 and Figure
4-31 .
Preset Setup
In Figure 4-29 , use eight direction arrows to adjust the camera to the proper
position.
In Figure 4-30 , click Preset and input the preset number. Clicking Set will
save the preset.
Now you can add this preset to one tour.