Specific safety s – Harbor Freight Tools 95630 User Manual
Page 5
Page 5
For technical questions, please call 1‑800‑444‑3353.
SKU 95630
SPECIFIC SAFETY S
1.
Maintain labels and nameplates on the
tool. These carry important information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
2.
DANGER! This Air Compressor is
NOT equipped and should not be used
“as is” to supply breathing quality air.
For any application of air for human
consumption, you must fit the Air
Compressor with suitable in-line safety
and alarm equipment (not included).
This additional equipment is necessary
to properly filter and purify the air to
meet minimal specifications for Grade D
breathing as described in Compressed
Gas Association Commodity
Specification G 7.1-1966, OSHA 29 CFR
1910. 134, and/or Canadian Standards
Associations (CSA).
3.
Make sure all tools and equipment
used with the Air Compressor are
rated to the appropriate capacity.
Do not use any tool or equipment that
operates above 58 PSI.
4.
Drain the Air Compressor everyday.
Do not allow excessive moisture to build
up inside the Air Compressor. Do not
open the Water Drain Valve (23) with
more than 10 PSI of air pressure in the
Compressor.
5.
Avoid injury. Do not direct compressed
air at people of animals. Do not direct
airflow at eyes or ears.
6.
Make sure the Air Compressor is
located on a flat, level, sturdy surface
capable of supporting the weight of
the Compressor and any additional
tools and equipment.
7.
Industrial applications must follow
OSHA guidelines.
8.
Do not stand or sit on the Air
Compressor. Serious injury could result
if the Compressor is tipped.
9.
Do not leave the Air Compressor
unattended when it is plugged in.
Turn off the Compressor and unplug
before leaving.
10.
Do not move or transport the
Air Compressor if the unit is
under pressure.
11.
Do not force the Air Compressor.
This tool will do the work better and safer
at the speed and capacity for which it
was designed.
12.
This Air Compressor will
automatically shut off on overload
or under excessive heat. Should
this occur, turn the Power Switch (34)
to its “OFF” position. Wait until the
Air Compressor cools. Then turn the
Power Switch (34) to its “ON” position to
resume work.
13.
Spray painting only. Do not use this Air
Compressor with gasoline, kerosene, or
any other flammable solvent.
14.
Maintain a safe working environment.
Make sure there is adequate
surrounding workspace. Do not use
this product in a damp or wet location.
15.
People with pacemakers should
consult their physician(s) before
using this product. Electromagnetic
fields in close proximity to a heart
pacemaker could cause interference to
or failure of the pacemaker. In addition,
people with pacemakers should adhere
to the following:
•
Avoid operating power tools alone.
•
Don’t use a power tool with the power
switch locked on.
•
If powered via a power cord be certain
that the tool is properly grounded. A
Specific Safety Instructions