HANNspree HansBook SN12E2 - Manual (Page 19)

15
2
Install Windows 7 in Notebook
Make sure you have these ready:
An USB DVD drive, a Notebook driver CD, Windows 7 Install CD
Before you continue :
■ Shut down your computer
■ Connect the USB DVD drive to an USB port of Notebook and connect the power
cord to AC power
2-1 Setting BIOS and Install a new Windows 7 system
1. Power on your Notebook, then press <Del> to enter BIOS setup during POST, set
"1st Boot Device" to "USB : SONY DVD-ROM D"(DVD drive name) in "Boot" ->
"Boot Device Priority" menu, the figure is shown as below. And then save changes
and exit BIOS.
2. Put the Windows 7 Install CD into the USB DVD drive.
3. The computer will reboot, and it will start loading files for installing Windows 7 system.
4. After that, it will start Windows and come out a “Install Windows” dialog box to set
the “Language to install”, “Time and current format” and “Keyboard or input
method”. Click “Next” to continue and click “Install now” button to start the setup.
5. When the license terms appears, select to accept and click “Next” to continue.
6. It then asks you to select the installation type. Click “Custom (advanced)” to install a
new copy of Windows.
Boot Device Priority Specifies the boot
sequence from the
1st Boot Device [USB : SONY DVD-ROM D] available devices .
2nd Boot Device [HDD : PO-WDC WD2500B]
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
↑↓ ←→
: Move
+/-/ :Change Option
Enter:Select
Esc :Exit
F1 :General help
F2/3 :Change color
F9 : Optimal defaults
F10 : Save and exit
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
Boot
BIOS SETUP UTILITY