HANNspree HansBook SN12E2 - Manual (Page 22)

18
2
10. When the installation is complete, setup will prepare your computer for the first
use. Then you can follow steps to select system settings, create an account, set a
password...etc, until the whole process is complete and enter Windows 7 system.
2-2 Install Drivers in Windows 7
1. When the Windows 7 is completely installed, you have to install the necessary drivers
before using the Notebook. Take out the Windows 7 Install CD from the USB DVD
drive, and put the driver CD inside. Waiting for a few seconds, the main menu will be
displayed on the screen.
2. Use these options to install all the drivers for your system. You must click "Intel Chipset
Driver" to install it first. After that, you can click "One Click Setup" to install all the other
drivers, or you can click on each individual driver to install it manually.
3. After all the drivers are installed, you need to restart your Notebook, then you can
start using it.