Honeywell HCS544 - Manual (Page 10)

10
Programming
Use the OSD (On-Screen Display) to program the camera.
OSD Menu Controls
Figure 4 OSD Menu Control
When no buttons are pressed, the menu display turns off
automatically after 70 seconds.
ENTER
+
E N T E R
ENTER (SET)
Press to access the SETUP
MENU.
Press to enter a screen or
select a menu option.
!
,
"
Move horizontally to and
between menus and options.
#
,
$
Move vertically to and between
menus and options.
“
% ” indicates submenus.
Select the menu, then press
ENTER.
Navigating through the menus
Select RETURN, then press
ENTER, to return to the
previous menu.
Select EXIT, then press ENTER,
to save your changes. Settings
remain in effect when power is
turned off, then on again.