Honeywell HCS544 - Manual (Page 9)

Document 800-01123 Rev B 9
02/08
3. Secure the power leads by retightening the terminal
screws until snug.
4. Plug the power supply into an appropriate power
source. The power LED illuminates to show that the
camera is receiving power. If it does not illuminate,
check the removable terminal block connections and
the power source.
Mounting the Camera
Mounting points are provided on the top and bottom of the
camera and are used to mount the camera on a bracket or
tripod. They are designed to accept standard sized
mounting bolts. The mounting bracket must be capable of
supporting the weight of the camera and its lens.
Caution Some installation codes dictate that the
mounting bracket must be capable of
supporting up to four times the combined weight
of the camera and lens.
Making Final Adjustments
Adjust the focus in your field of view; that is, until you see a
clear image. If necessary, adjust the brightness using the
OSD menu controls (see ”LENS DC/Brightness’ - DC/
BRIGHTNESS or ”AGC (Automatic Gain Control) DC/Brightness’ on
page 12). Confirm the exposure on the monitor screen.