haier L32A9 -AK - Manual (Page 10)

Remote controller key function
7
The remote controller cannot be operated unless the batteries are
properly loaded.
Note:
The function just takes the remote control for example in this manual
P+/-(CH+/-),V+/-(VOL+/-),MENU,TV/AV and POWER on TV panel are corresponding
with the CH+/-,VOL+/-,MENU,TV/AV and POWER keys.
DISPLAY POWER
MUTE STILL I/II PIC.SIZE
TV/AV S-VIDEO DVD/DTV PC/DVI
OK Q.VIEW
CH+
CH-
VOL- VOL+ MENU
PSM
1 2 3
4 5 6
7 8 9
-/-- 0 ZOOM/MOVE
USB
PIP SWAP SCAN CH.EDIT
SHUTTLE SLEEP H.LOCK TIME SKIP
ZOOM
RETURN
SSM
HELP ENTER
The cover of the multi-media keys
press down to the appropriate position
1.DISPLAY: Display the current info
2. POWER: Press to turn on the TV from standby
mode. Press again to switch off the TV to standby
mode.
3.STILL: Press it to freeze-frame the current screen
press again to continue playing(never see the still
picture for long time, it would burn-in the screen)
4.
/ : Nicam selection in the signal No available)
5. MUTE: Press this button to mute the sound.
Press again to reactivate the sound. Sound also
reactivated if the power is turned off then on or
if press VOL+ button.
6. PIC.SIZE: Press to select the display the size of
the screen(never see the 4:3 picture for long time,
it would burn-in the screen)
7. S-VIDEO: Press it to select S terminal input.
8. DVD/DTV: Select YUV input
9. TV/AV : Press this key to select the sources
10. PC/DVI: Press it to select inputs as follows:
TV-VGA-DVI-TV
11. OK: Press to confirm
12. Q.VIEW: Back to the last channel
13. CH+/-: Select the option up and down in menu
or select channels when there is no OSD.
14. MENU: Press to display or exit the menu
15. VOL+/-: Left and right orientation in menu option
or adjust the volume when there is no OSD.
16. PSM: Press to select the picture mode
17. : Press to select the sound mode
18. Number key: Press to select the channel number
19. No available
20. ZOOM/MOVE: PIP moving(No available)
21. PIP: No available
22. SCAN: Scan all preconcerted channel program
23.SWAP: Switch the input signal of the PIP and
the main picture(No available)
24. CH.EDIT: Press to display the stored channel
diagram(No available)
25. SLEEP: Can be used to set time to change
the TV into the standby status after a period of
preset time.
26.H.LOCK button
27.SHUTTLE button
28.Time skip button
29. Only for the multi-media ,reference to
the instruction following.
SSM