haier L32A9 -AK - Manual (Page 13)

DVI-DTV OUTPUT R AUDEO L RGB-DTV OUTPUT R AUDEO L Y Pb Pr R AUDEO
AUDIO AUDIO DVI IN AUDIO
VGA IN
VGA Pr/Cr Pb/Cb Y L R
AUDIO AUDIO S-VIDEO Pr/Cr Pb/Cb Y L R VIDEO L R
DVD setup
How to connect
1
. Connect the DVD video outputs (Y, Pb/Cb,
Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr)
INPUT jacks on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on
the TV, as shown in the figure.
2
. If your DVD only has an S-Video output
jack, connect this to the S-VIDEO input on
the TV and Connect the DVD audio outputs
to the AV IN jacks on the TV, as shown in the
figure.
NOTE: If your DVD player does not have
component video output, use S-Video.
How to use
1
. Turn on the DVD player, insert a DVD.
2
. Use the S-Video button on the remote
control to select S-VIDEO mode.
3 . Press Play button on external equipment
for program play.
4
. Refer to the DVD player's manual for
operating instructions.
External Equipment Connections
DVD
or
DTV setup
-To watch digitally broadcast programs,
purchase and connect a digital set-top box.
How to connect
Use the TV`s COMPONENT (Y, Pb/Cb,
Pr/Cr) INPUT jacks, VGA or DVI port for
video connections, depending on your set-
top box connections available. Then, make
the corresponding audio connections.
How to use
1
. Turn on the digital set-top box. (Refer to
the owner`s manual for the digital set-top
box.)
2
. Use PC/DVI on the remote control to
select PC or DVI (Y, Pb/Cb, Pr/Cr) mode.
3 . Press Play button on external
equipment for program play.
Digital Set-top Box
or or
10
IN IN IN IN
IN