HighPoint Technologies 2680 - Manual (Page 4)

Rocket RAID 2680 FreeBSD Installation Guide
- 2 -
#umount /mnt
Note
If the floppy diskette is inserted into an USB floppy controller and the device name
in the system is da0, then replace fd0 in the upper command with da0. The driver
also could be put on a USB disk, and the driver disk can be created as the floppy
diskette. For example: use the first partition of the USB disk da1, then replace fd0
in the upper command with da1s1 or da1.
Step 4 Install FreeBSD
1) Start installing the FreeBSD by booting from installation CD.
2) When “Welcome to FreeBSD” screen appears, select “6”.
3) Insert RR2680 driver diskette into floppy drive now. Type in " load diskx:rr2680-x.x "
(without quotation mark) and then press enter.