HP DL160 - Manual (Page 47)

System Unit Dimensions (H x W x D)
(with bezel) 1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm)
Weight
(approximate) Maximum
(all hard drives, power
supplies, and processors
installed) 34.00 lb (16.78 kg)
Minimum
(one hard drive, power
supply, and processor
installed) 28.00 lb (12.7 kg)
Input Requirements
(per power supply) Rated Line Voltage 90 to 132 VAC
180 to 264 VAC
Rated Input Current 5. 8 Amps (at 100 VAC) to 2.9 Amps (at 200
VAC)
Rated Input Frequency 47 to 63 Hz
BTU Rating Rated Input Power 570W (at 100 VAC)
565W (at 200 VAC)
Maximum 500W 1940 BTU / hr (at 100
VAC)
1920 BTU/hr (at 200
VAC)
460W 1773 BTU / hr (at 120
VAC)
1715 (at 240 VAC)
750W 2892 BTU / hr (at 120
VAC)
2797 (at 240 VAC)
Power Specifications To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL:
www.hp.com/go/proliant-energy-efficient
Or
www.hp.com/go/hppoweradvisor
- Click on the system of interest. Example: DL160 G6
- Follow the instructions of the next screens.
Power Supply Output
(per power supply) Rated Steady-State Power 500 Watts (at 100 VAC),
500 Watts (at 200 VAC)
Maximum Peak Power
(See Power Specifications
Tables) 500Watts (at 100 VAC),
500 Watts (at 200 VAC)
System Inlet Temperature Operating 10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
QuickSpecs
HP ProLiant DL160 Generation 6
Technical Specifications
DA - 13247 Worldwide QuickSpecs — Version 11 — 11.16.2009 Page 47